Avital Tornado 2 Guide d'installation télécharger pdf (Page 23)

H2/3

BROWN (+) BRAKE SWITCH SHUTDOWN WIRE

This wire MUST be connected to the vehicle’s brake light wire. This is

the wire that shows (+) 12V when the brake pedal is depressed. The

remote start will be disabled or shut down any time the brake pedal is

depressed.

H2/4

GRAY (-) HOOD PINSWITCH SHUTDOWN WIRE

This wire MUST be connected to the hood pinswitch. This input will dis-

able or shut down the remote start when the hood is opened.

H2/5

BLUE/WHITE (-) 200mA 2ND STATUS/REAR DEFOGGER OUTPUT

This wire supplies a 200mA output as soon as the module begins the

remote start process. The H2/5 BLUE/WHITE wire can also be used

to activate the defogger trigger (latched/pulsed) 10 seconds after suc-

cessful remote start. (See the

Feature Descriptions

section in this guide

for details about programming this output.)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 51 52

Pas de commentaire

Avital Tornado 2 Guide d'installation Page 23