Avital Tornado 2 Guide d'installation télécharger pdf (Page 26)

Programming jumpers

➢ Light ﬂash (+)/(-)

This jumper is used to determine the light ﬂash output polarity. In the (+)

position, the on-board relay is enabled and the unit will output (+)12V

on the WHITE wire, H1/9. In the (-) position, the on-board relay is dis-

abled. The WHITE wire, H1/9, will supply a 200mA (-) output suitable

for driving factory parking light relays

Note:

For parking light circuits that draw 10 amps or more, the internal

jumper must be switched to a (-) light ﬂash output.

P/N 8617

or a

standard automotive SPDT relay must be used on the H1/9 light ﬂash

output harness wire.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Pas de commentaire

Avital Tornado 2 Guide d'installation Page 26