Avital Tornado 2 Guide d'installation télécharger pdf (Page 33)

to the LED ON settings. These are called the default settings. Pressing



will set it to the LED ON setting. Pressing



on the remote will

cycle through the available options in each feature.

Release.

The Program switch can now be re-

leased.

You can advance from feature to feature by pressing and releasing the

Program switch the number of times necessary to get from the feature

you just programmed to the feature you wish to access. For example,

in Menu One, if you just programmed feature 1-3 to off, and you next

want to program the next feature 1- 4, release the Program switch.

Press and release it once to advance from Feature 1-3 to Feature 1- 4.

Then press it once more and

HOLD

it. The LED will ﬂash in groups of 4

to conﬁrm that you have accessed Feature 1- 4.

The learn routine will be exited if any of the following occurs:

• The ignition is turned on.

• The Program switch is pressed too many times.

• More than 25 seconds elapses between programming steps.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 51 52

Pas de commentaire

Avital Tornado 2 Guide d'installation Page 33